UPG2163T5N-E2-A DataSheet
DATASHEET
UPG2163T5N-E2-A 描述
CURRENT LIMIT PROTECTION The LX8819 includes over current protection. When the output load current exceeds 1.4A (typical) the current limit protection circuit forces the regulator to decrease the output current in order to maintain safe levels.
UPG2163T5N-E2-A 特点
The UPG2163T5N-E2-A is a single-chip, highly integrated, bus master, SCSI I/O processor for use in SCSI initiator-type applications. The device interfaces the PCI bus to a wide, Ultra SCSI bus and contains an onboard RISC processor. The UPG2163T5N-E2-A is a fully autonomous device, capable of managing multiple I/O operations and associated data transfers from initiation to completion without host CPU intervention. The UPG2163T5N-E2-A provides power management feature support in accordance with the PCI Bus Power Management Specification while retaining full pin compatibility with the QLogic ISP1040B. The UPG2163T5N-E2-A block diagram is illustrated in figure 1.
UPG2163T5N-E2-A 应用
Technical/Catalog InformationUPG2163T5N-E2-AVendorNECCategoryRF and RFID RF Type
相关型号
型号
数量
厂商
批号
描述
询价
7426
11+
The AV34063 is a monolithic control circui
10047
11+
Notes: 1. Test conditions assume signal transiti
10241
11+
PARAMETER Reference Voltage Section Fb Voltage
13752
11+
The floating-point register file is made u
13848
Hardware Reset, active Low. Provides a hardware me
5208
A high on the MASTER RESET (MR) sets all the cont
14048
Addresses and chip enables are registered at risin
7426
11+
The AV34063 is a monolithic control circui
16338
11+
The bi-polar long-term timer U6046B is designed t
4989
11+
NOTES: 1. All VDD pins must be connected to 3.3V