TPS54386PWPR DataSheet
DATASHEET
TPS54386PWPR 描述
Notes: 6. For in-band signals 115.2 Kb/s where 8.1 µW/cm2 EI 500 mW/cm2 . 7. Wake up time is measured from SD pin high to low transition or VCC power on to valid RXD output. 8. Typical value is at EI = 10 mW/cm2. 9. Maximum value is at EI = 500 mW/cm 2.
TPS54386PWPR 特点
NOTE:The CT capacitor must be connected between this pin and GND, not VIN, to assure that the SD/CT pin is not pulled significantly negative during power-up. This pin should not be externally driven more negative than C5 V or the device will be damaged.
TPS54386PWPR 应用
Technical/Catalog InformationTPS54386PWPRVendorTexas Instruments (VA)CategoryIntegrated Circuits (ICs) Type