LMX2306TMX DataSheet
DATASHEET
LMX2306TMX 描述
The maintenance charge is intended to offset the natural self-discharge of NiCd or NiMH batteries by keeping their cells primed at peak charge. After the topping charge ends, the LMX2306TMX begins this charge stage by once again extending the delay time between charge pulses. The maintenance charge will last for as long as the divided down battery voltage is greater than 0.5V at VIN pin 7. The MMN indicator is a continuous active low during this stage.
LMX2306TMX 特点
The Hynix LMX2306TMX Series are Dual In-line Memory Modules suitable for easy interchange and addition of 256Mbytes memory. The Hynix LMX2306TMX Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising edge of the clock input. The data paths are internally pipelined to achieve very high bandwidth.
LMX2306TMX 应用
The LMX2306TMX will respond with an acknowledge after recognition of a start condition and its slave address and once again after successful receipt of the command byte. If the command is followed by a data byte the LMX2306TMX will respond with a final acknowledge.