DF13-3S-1.25C DataSheet
DATASHEET
DF13-3S-1.25C 描述
In ringing mode (Ring relay in position 2), the only protection device involved is the CLP30-200B1. In normal conditions, the CLP30-200B1 operates in region 1 of A1 curve, and is idle. If an overvoltage occurring between TIP (or RING) and GND reaches the internal overvoltage reference (+/- 200V), the CLP30-200B1 acts and the line is short-circuited to GND. At this time the operating point moves to region 2 for positive surges (region 3 for negative surges). Once the surge current disappears, the device returns to its initial state (region 1).
DF13-3S-1.25C 特点
This register is available to be read out of the DF13-3S-1.25C by the microprocessor. It contains information about the status of the devices at this point. Bits 0-3 are set when that channel reaches a TC or an external EOPN is applied. These bits are cleared upon Reset and on each Status Read. Bits 4-7 are set whenever their corresponding channel is requesting.
DF13-3S-1.25C 应用
Technical/Catalog InformationDF13-3S-1.25CVendorHirose Electric Co LtdCategoryConnectors Color