SN65HVD3082EP DataSheet
DATASHEET
SN65HVD3082EP 描述
used for the high-side switch. The high-side driver voltage is supplied by PVCC. The voltage is maintained by a floating bootstrap capacitor, which is continually recharged by the switching action of the output. During shutdown UGATE is held low.
SN65HVD3082EP 特点
The SN65HVD3082EP contains five voltage comparators; four are for monitoring +5V, -5V, +12V, and -12V, and the fifth monitors any desired voltage. The SN65HVD3082EP is identical, except it monitors 15V supplies instead of 12V. The resistors required to monitor these voltages and provide comparator hysteresis are included on- chip. All comparators have open-drain outputs. These devices consume 250µA max supply current over tem- perature.
SN65HVD3082EP 应用
Technical/Catalog InformationSN65HVD3082EPVendorTexas InstrumentsCategoryIntegrated Circuits (ICs) Number of Drivers/Receivers
相关型号
型号
数量
厂商
批号
描述
询价
9427
08+
S3901/S3904 series do not require any DC voltage
15092
11+
The SAB 80C515/80C535 is a stand-alone, high-perfo
3415
11+
Clock output traces should use series termination
5167
The Set Default command resets all conditions to t
12862
8-Bit Resolution 20 MHz Sampling Rate DNL = +1/2
18240
Operating voltage: 2.4V~3.6V Directly drives an e
10770
When executing a jump instruction, conditional ski
14200
Note 10: VIN is compared to the programmed output